UC500 Cisco Links
UC500 Getting Started Guide
http://www.cisco.com/en/US/products/ps7293/products_getting_started_guid...
- Printer-friendly version
- Login or register to post comments
- Email this Book page
Book Navigation
UC500 Rss Feed
Popular Tags
Active forum topics
- how to setup auto attendent feature using UC520 series.
- Problem in registering IP communicator (cisco sw phone) to UC500 via VPN
- configuring rollover with 4 port FXO
- UC520 and Windows SBS2003
- No call out and incomming calls
- Analogue trunk with UC520
- When I connect via VPN client I can not ping other computers on remote site
Cisco TAC Issues - CME - UE
- JPN: 7921 XML Services are displayed as squares , Open CSCsq42134
- CME DN 'description' command may allow for open-ended quote delimination , Open CSCsq48167
- forwarded MLPP call caller ID corrupted , Open CSCso13941
- Memory Leak - "Presence Process" , Open CSCsq41189
- CME/SRST with dialpalan does not remove dial-peer after IP phone unreg. , Open CSCsq34098
Comments
First time install of CUC500
I have been given a CUC500 to install on a site. I plan to get a SIP trunk to connect him to the outside world. He will have 3 analogue phones and a fax ( I was going to put these on the FXS card) and 4 IP phones, 4 PCs and a server connected to the 8 LAN ports. I need a bit of guidance regarding sequence/config for these devices. In addition they want to use the firewall, auto attendant and wireless capability. Any advise or example configs would be greatly appreciated.
Cheers
changing default ip address
i have to add the uc500 to an existing network on a different subnet than the default. Is there a procedure to do this or just change the bvi ip address via the cli. Also i will need to disable DHCP as we have a small business server which acts as a dhcp server which i also need to point to the voice vlan???
Me 2
I am looking for the same change info. The system will not let you change the IP for VLAN1. I can go to the CLI and change the config from there but was told not to use the CLI due to issues once you start using Config Assist.
Why you need to put the
Why you need to put the server on the voice lan? That is not necessary. If you disable dhcp, the phone will need to be configured manualy and that is a MAJOR inconvenient. The way it works by default is the easier and better, believe me.
PS next time open a new thread for problems as this is dedicated to something else.
UC500 Getting Started Guide
I looks like the previous link has been changed...found this new one....
http://www.cisco.com/en/US/products/ps7293/products_getting_started_guid...