Home » Forums » Cisco VOIP and SBCS » UC500 Configuration

trunk DNs not showing as busy

Submitted by tato386 on Thu, 05/08/2008 - 21:14

I have configured my UC520 in hybrid mode with some phone having buttons for DNs configured as trunks and other phones having to dial "9" to get a line. With this setup if an phone configured with a trunk DN picks up the line all other ephones using this same DN show the DN as busy. However, when a phone that dials "9" takes a line the phones with the trunk DN do not show it as busy. Is there a way I can get the buttons with the trunks show as busy when they are in use via a phone that dialed "9" to get out?

Thanks,
Diego

0
Your rating: None
‹ Changing Default SSID on UC520 built-in wireless AP UC520 With PSTN lines ›
#1Submitted by pb on Fri, 05/09/2008 - 20:04.

Should be possible, check

Should be possible, check the option fxo monitor with trunk.

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.