General Discussion

General Cisco Discussion that does not fit into the other Catagories

Low audio when switching between calls

Greetings all,

One Way Audio with IP Communicator

Having issues with IP Communicator on an Lenovo Thinkpad. There is only one way audio. Audio inbound to the IPC is working, it is the audio from the IPC that is the problem.

Once in a while - Only sound one way in voice conversation (UC500)

Hi,

I have a customer, that once in a while expirience that there is only sound in one direction when talking with a person also in the same UC500.

CE-520 versus standard POE Switch

How do you configure a standard POE switch to add additional switch ports to the UC-520? I have a POE switch made by TrendNet.

URL Idle parm not working

Trying to get an xml logo file to play when URL idle is 0. I have tested the path and file by setting it as a service and it comes up on the phone just fine.

Lock 7975 and 7906 sccp phones

Hello and thank you all for your help.

We would like to lock some 7975s and 7906s with a password, so that when the user leaves the desk, no one else can use the phone.

7921 localization

Anyone knows if there is any spanish localization files for 7921 phones with uc520?
Thanks in advance.

Converting Cisco 524G to SIP

Does anyone know how to convert a Cisco 521G or 524G Phone to use SIP protocol instead of the proprietary SCSP?

STP

I need to Specify the specific vlan to carry BPDU by Tagging at cisco 2950 Switch have any idea . i am using EI Image on cisco 2950?

Upgrade from 32 to 48?

Does anyone know the product/part number or process you would go through to upgrade from 32 users to say 48? We're at capacity and need to add more licenses. Thanks to anyone who knows off hand!

Creating an IP Phone with physical key activation

I came across an environment where the customer wanted to physically control the operation on an IP Phone. It was located in a school environment and needed to physical turned off an on.

uc500 + access point

i have a problem in adding two or three access point on the UC500.AIR-AP521G-E-K9 is the access point that is plugged on the uc500.the problem is the topology of the CCA is not showing me the two acce

Uploading a file with TFTP to UC500

I might be new at this. but how do you upload files via TFTP to the UC500 so you can load them. I tried to bring up the follow doc and it is no longer available on Cisco's site.

SBCS Software now available with CCO or Cisco.com ID not smartnet

Cisco has actually put up all the SBCS software on their Support Wiki – All you need to access is CCO or Cisco.com ID not a Smartnet contract as usual

7970 phone display on in/out calls

Hi,

Very useful site and has helped me get over a few issues with CCME.

Syndicate content