UC500.com

Hi Everyone,

I'm wondering if anyone would be so kind and lend a 2nd pair of eyes to this config. I am having problems have my transcoding dspfarm register with CME. I've done this exact same config with other boxes with no other problems.

Below is the relevant portion of my configs:

---------------------
!
stcapp ccm-group 1
stcapp
!
stcapp feature access-code
!
multilink bundle-name authenticated
!
!
voice call send-alert
voice rtp send-recv
!
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
supplementary-service h450.12
sip
no update-callerid
!
!
voice class codec 1
codec preference 1 g711ulaw
codec preference 2 g729r8
!
voice class codec 5
codec preference 1 g729r8
codec preference 2 g729br8
codec preference 3 g711ulaw
!

voice register global
max-dn 56
max-pool 14
!
.
.
.
!
voice-card 0
dspfarm
dsp services dspfarm
!
!
.
.
!
!
interface Loopback0
description $FW_INSIDE$
ip address 10.1.10.2 255.255.255.252
ip nat inside
ip virtual-reassembly
!
interface FastEthernet0/0
description $FW_OUTSIDE$
ip address dhcp
ip access-group 106 in
ip nat outside
ip inspect SDM_MEDIUM out
ip virtual-reassembly
shutdown
duplex auto
speed auto
service-policy input sdmappfwp2p_SDM_MEDIUM
service-policy output sdmappfwp2p_SDM_MEDIUM
!
interface Integrated-Service-Engine0/0
description cue is initialized with default IMAP group$FW_INSIDE$
ip unnumbered BVI100
ip nat inside
ip virtual-reassembly
service-module ip address 10.2.100.1 255.255.255.0
service-module ip default-gateway 10.2.100.2
!
.
.
!
interface FastEthernet0/1/8
switchport mode trunk
!
interface Dot11Radio0/5/0
no ip address
!
encryption vlan 1 mode ciphers aes-ccm
!
encryption vlan 100 mode ciphers aes-ccm
!
ssid uc520-data
!
ssid uc520-voice
!
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
station-role root
!
interface Dot11Radio0/5/0.1
encapsulation dot1Q 1 native
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
!
interface Dot11Radio0/5/0.100
encapsulation dot1Q 100
bridge-group 100
bridge-group 100 subscriber-loop-control
bridge-group 100 spanning-disabled
bridge-group 100 block-unknown-source
no bridge-group 100 source-learning
no bridge-group 100 unicast-flooding
!
interface Vlan1
no ip address
bridge-group 1
bridge-group 1 spanning-disabled
!
interface Vlan100
no ip address
bridge-group 100
bridge-group 100 spanning-disabled
!
interface BVI1
description $FW_INSIDE$
ip address 10.2.0.2 255.255.255.0
ip nat inside
ip virtual-reassembly
!
interface BVI100
description $FW_INSIDE$
ip address 10.2.100.2 255.255.255.0
ip nat inside
ip virtual-reassembly
!
ip route 0.0.0.0 0.0.0.0 10.2.100.3
ip route 10.2.100.1 255.255.255.255 Integrated-Service-Engine0/0
!
ip http server
ip http authentication local
ip http secure-server
ip http path flash:
ip nat inside source list 1 interface FastEthernet0/0 overload
.
.

control-plane
!
bridge 1 route ip
bridge 100 route ip
!
!
voice-port 0/0/0
!
voice-port 0/0/1
!
voice-port 0/0/2
!
voice-port 0/0/3
!
voice-port 0/1/0
connection plar opx 8201
description Configured by CCA Auto Attendant
caller-id enable
!
voice-port 0/1/1
connection plar opx 8201
description Configured by CCA Auto Attendant
caller-id enable
!
voice-port 0/1/2
connection plar opx 8201
description Configured by CCA Auto Attendant
caller-id enable
!
voice-port 0/1/3
connection plar opx 8201
description Configured by CCA Auto Attendant
caller-id enable
!
voice-port 0/4/0
auto-cut-through
signal immediate
input gain auto-control -15
description Music On Hold Port
!
sccp local BVI100
sccp ccm 10.2.100.2 identifier 1
sccp
!
sccp ccm group 1
associate ccm 1 priority 1
associate profile 1 register EDM_XCODE
keepalive retries 5
!
dspfarm profile 1 transcode
codec g711ulaw
codec g711alaw
codec ilbc
codec g723r63
codec g723r53
codec gsmamr-nb
codec g729ar8
codec g729abr8
codec g729br8
codec g729r8
maximum sessions 6
associate application SCCP

no dial-peer outbound status-check pots
!
!
telephony-service
sdspfarm units 5
sdspfarm transcode sessions 6
sdspfarm tag 1 EDM_XCODE
video
load 7960-7940 P00308000500
load 7914 S00105000200
load 7902 CP7902080002SCCP060817A
load 7921 CP7921G-1.0.4
load 7931 SCCP31.8-2-2SR2S
load 7941GE SCCP41.8-2-2SR2S
load 7941 SCCP41.8-2-2SR2S
load 7961GE SCCP41.8-2-2SR2S
load 7961 SCCP41.8-2-2SR2S
load 7975 SCCP75.8-3-2S
load 7965 SCCP45.8-3-2S
load 7945 SCCP45.8-3-2S
load 7942 SCCP42.8-3-2S
load 7962 SCCP42.8-3-2S
load 7971 SCCP70.8-2-2SR2S
load 7970 SCCP70.8-2-2SR2S
load 7936 cmterm_7936.3-3-13-0
load 7906 SCCP11.8-2-2SR2S
load 7911 SCCP11.8-2-2SR2S
load 521G-524G cp524g-08-01-07
max-ephones 14
max-dn 56
ip source-address 10.2.100.2 port 2000
auto assign 10 to 19
auto assign 5 to 8 type anl
caller-id block code *916
calling-number initiator
service phone videoCapability 1
service dnis overlay
service dnis dir-lookup
timeouts interdigit 6
system message Graycon - Edmonton
url services http://10.2.100.1/voiceview/common/login.do
url authentication http://10.2.100.1/voiceview/authentication/authenticate.do
time-zone 6
voicemail 8200
max-conferences 8 gain -6
call-forward pattern .T
call-forward system redirecting-expanded
moh music-on-hold.au
multicast moh 239.10.16.16 port 2000
web admin system name cisco secret 5 $1$LueE$BYPOgzzgSJk4ep/WZBDMN0
dn-webedit
time-webedit
transfer-system full-consult dss
transfer-pattern 9.T
transfer-pattern .T
secondary-dialtone 9
create cnf-files version-stamp 7960 Jul 22 2008 10:34:10
!
-----------------

The problem being is that I the dspfarm will NOT register with SCCP? Can anyone see anything obviously wrong? This is what I see when I do a show dspfarm:

Profile ID = 1, Service = TRANSCODING, Resource ID = 1
Profile Description :
Profile Service Mode : Non Secure
Profile Admin State : UP
Profile Operation State : RESOURCE ALLOCATED
Application : SCCP Status : NOT ASSOCIATED
Resource Provider : FLEX_DSPRM Status : UP
Number of Resource Configured : 6
Number of Resource Available : 6
Codec Configuration
Codec : g711ulaw, Maximum Packetization Period : 30
Codec : g711alaw, Maximum Packetization Period : 30
Codec : ilbc, Maximum Packetization Period : 60
Codec : g723r63, Maximum Packetization Period : 60
Codec : g723r53, Maximum Packetization Period : 60
Codec : gsmamr-nb, Maximum Packetization Period : 60
Codec : g729ar8, Maximum Packetization Period : 60
Codec : g729abr8, Maximum Packetization Period : 60
Codec : g729br8, Maximum Packetization Period : 60
Codec : g729r8, Maximum Packetization Period : 60

SLOT DSP VERSION STATUS CHNL USE TYPE RSC_ID BRIDGE_ID PKTS_TXED PKTS_RXED

0 1 21.4.3 UP N/A FREE xcode 1 - - -
0 2 21.4.3 UP N/A FREE xcode 1 - - -
0 2 21.4.3 UP N/A FREE xcode 1 - - -
0 2 21.4.3 UP N/A FREE xcode 1 - - -
0 2 21.4.3 UP N/A FREE xcode 1 - - -
0 2 21.4.3 UP N/A FREE xcode 1 - - -

Total number of DSPFARM DSP channel(s) 6

Sorry for the LONG post, any help is much appreciated!

Thanks,
Ryan