Hi All, Finally able to get my CCME to work with my SIP provider for inbound / outbound calls. Now I'm wondering if there's any chance that I could get MWI the red lamp on Cisco handsets to work with SIP? Below are the lines that I've added to my config but it doesn't seemed to have any effect, tried leaving myself a messages and no red lamps :( Confirmed that message existed by calling provider's voicemail. sip-ua telephony-service ephone-dn 11 dual-line ephone 5 Appreciate any assistance / tips to get this working :) |
|||
 |
UC500.comCisco Communication Manager Express, UC520, SMB VOIP reference and community |
I've had problems after
I've had problems after upgrading the Unity Express using the CCA, whereby an IP address for unity is changed to something weird, presumably by the CCA, and is not reverted back to what it should be. The main symptom of this is the MWI lamps do not function, but everything else is OK.
Telnet to the unity service module and check if all is well, but I'd be willing to bet there's a wrong IP address in there...
(edit - sorry misread your post completely, was referring to unity express MWI) PLease ignore!