user warning: Table './uc500_new/accesslog' is marked as crashed and should be repaired query: INSERT INTO accesslog (title, path, url, hostname, uid, sid, timer, timestamp) values('Forums', 'forum', '', '38.107.179.219', 0, 'a78df1e08a693ed698bea75628afc49c', 362, 1337351521) in /home/uc500/public_html/modules/statistics/statistics.module on line 63.

FXO (voice-port) showing OFF-HOOK even after disconnect call

3 replies [Last post]
Wed, 04/21/2010 - 06:43
vikrant.ambhore
vikrant.ambhore's picture
Offline
Last seen: 23 weeks 2 days ago
Joined: 04/21/2010

Hi All,
 We have UC520 with 4 FXO & two analog line, My scenario is when anyone made calls on 08 9377 3097 (voice-port0/1/1) means All incoming call which are coming  on 08 9377 3097 (voice-port0/1/1) should be diverted to 206 (ext.). If anyone are unable to receive call on 206 within 15 sec. then call divert to my  Mobile from 08 9377 0540 (voice-port0/1/0)
After disconnecting Incoming call means Hang up the phone & make call again on same no. Voice-port 0/1/1 that time I found  08 93773097 (Voice-port 0/1/1 ) is still engaged(busy) & also saw voice port is going to OFF-HOOK.
I have use below configuration :voice class custom-cptone test  dualtone disconnect   frequency 476   cadence 488 488 488 488 487 487 487 487 ! voice-port 0/1/0  supervisory custom-cptone test  no battery-reversal  output attenuation -6  cptone AU  timeouts call-disconnect 3  timeouts wait-release 3  connection plar opx 202  impedance complex1  caller-id enable ! voice-port 0/1/1  supervisory custom-cptone test  no battery-reversal  output attenuation -6  cptone AU  timeouts call-disconnect 3  timeouts wait-release 3  connection plar opx 206  impedance complex1  caller-id enable ! ephone-dn  15  dual-line  number 206 no-reg primary  label 206  description Lindsay Clark  name Lindsay Clark  call-forward busy 0862101169  call-forward noan 0862101169 timeout 10
 Can anyone help me on this Issue ?
Thanks
Vikrant

Share this
Top
Fri, 04/23/2010 - 02:02
#1
zvuksanovic
zvuksanovic's picture
Offline
Last seen: 2 years 3 weeks ago
Joined: 04/22/2010
Re:

Hi Vikrant,
Try with supervisory disconnect dualtone mid under fxo port.
Best regards,
Zoran

Top
Fri, 04/23/2010 - 02:52
#2
vikrant.ambhore
vikrant.ambhore's picture
Offline
Last seen: 23 weeks 2 days ago
Joined: 04/21/2010
Hi Zoran, I did use this

Hi Zoran,
I did use this command but no luck, I use below configuration, If you have any good solution pls help me
voice class custom-cptone test
dualtone disconnect
frequency 476
cadence 488 488 488 488 487 487 487 487
!
voice-port 0/1/0
supervisory custom-cptone test
no battery-reversal
output attenuation -6
cptone AU
timeouts call-disconnect 3
timeouts wait-release 3
connection plar opx 202
impedance complex1
caller-id enable
!
voice-port 0/1/1
supervisory custom-cptone test
no battery-reversal
output attenuation -6
cptone AU
timeouts call-disconnect 3
timeouts wait-release 3
connection plar opx 206
impedance complex1
caller-id enable
!
ephone-dn 15 dual-line
number 206 no-reg primary
label 206
description Lindsay Clark
call-forward busy 0862101169
call-forward noan 0862101169 timeout 10

Regards
Vikrant

Top
Sun, 02/12/2012 - 14:25
#3
sebbk
sebbk's picture
Offline
Last seen: 12 weeks 5 days ago
Joined: 02/01/2011
Hi,maybe you already found

Hi,
maybe you already found the solution, but I got the exact same problem, and after trying everything zvuksanovic advice was the solution.
My voice port configuration :
voice-port 0/1/0
supervisory disconnect dualtone mid-call
no battery-reversal
cptone FR
timeouts call-disconnect 5
timeouts wait-release 5
connection plar 2200
impedance complex2
description ****
caller-id enable

Top

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.

Similar entries