What else do I need to do here to get caller ID to show on my phones? Right now, incoming calls show as from AO, A1 and so on? BTW, is this the best way to show analog CO trunks on the phones?
Thanks,
Diego
voice-port 0/1/0
connection plar opx 3A10
caller-id enable
!
voice-port 0/1/1
connection plar opx 3A11
caller-id enable
!
dial-peer voice 50 pots
destination-pattern A0
port 0/1/0
no sip-register
!
dial-peer voice 51 pots
destination-pattern A1
port 0/1/1
no sip-register
!
ephone-dn 30 dual-line
number 3A10 no-reg primary
label Line 1
call-forward busy 200
call-forward noan 200 timeout 10
trunk A0
!
ephone-dn 31 dual-line
number 3A11 no-reg primary
label Line 2
call-forward busy 200
call-forward noan 200 timeout 10
trunk A1
!
Example: voice-port 0/2/0
Example:
voice-port 0/2/0
caller-id enable
-Dapunisher
A+. Network+, MCP, CCNA, CCVP
Your ISP must forward Caller
Your ISP must forward Caller ID to your lines.. Are you sure you paid for this service?
John
NIKTEK LLC
Yes, we had caller-ID with
Yes, we had caller-ID with our previous phone system.
Diego